This kit fits to following models:
- FR 2
- FR 1
- FR Deluxe
Unfortunately due to the riveted (not screwed) cuff, this set can not be fully installed for FRX models.
Each set of Seba - FR Custom Kit consists of the following elements:
- 2 x Cuff (upper / spoiler)
- 2 x buckle for mounting screws
- 1 x pair of laces
- 2 x sliders with screws and washers
- 2 x 45 ° with buckle straps, washers and mounting screws
Set Seba – FR Custom Kit consists of the following components: available in 7 colors:
- black
- white
- red
- blue
- green
- violet
- orange
- yellow
And in 3 sizes:
- 34-37
- 38-42
- 43-47
Before buying Seba – FR Custom Kit, check if you chose the right size!
For mounting the Seba – FR Custom Kit we will need:
- screwdriver
- Allen key (the same whcih we use to unscrew the wheel)
The assembly process is simple and requires no special skills. Anyone who has had the opportunity to exchange the skate wheels should have no no problems with it.
The first step is to remove the original Cuffs by removing two screws on each skate. It is important to keep all parts of cuff mounting, because they are not supplied with Seba – FR Custom Kit. In addition, please remember the original setting of cuff position.
In most cases the cuffs supplied with Seba – FR Custom Kit are already equipped with buckles. If they are not included, screw the buckles to tteh cuffs before mounting the them on the skate using a screwdriver, screws and nuts.
The second step is the removal of 45 ° buckle, by removing the two screws with a screwdriver (one on each side of the skate).
After loosening the fastening screw, note the metal thread is in your shell. They can be used to mount a new buckles without the need of replacing them. Before installing the new components the tow buckle sets should be prepared:
- plastic part with plastic buckle + pad + mounting screw
- plastic part with Seba logo + strap buckle + pad + mounting screw
Before attaching, make sure that the element of the strap is placed on the inside of the skate, while the logo on the plastic part will be set in the right direction.
After mounting buckles, cuffs and 45 ° straps we need to screw-in the new sliders and replace the laces. Sliders are mounted with the two screws and screwdriver. As in the case with the buckles - during the assembly of new elements we can use the existing threads without the need to replace them. Be sure to put a metal mounting plate and a corresponding set of plastic piece - a smaller part should be at the front.
Original buckles, laces, cuffs are worth preserving, because maybe in the future you'll want to mix the colors of our items, and having even more unique look of our Seba - FR skates. Regardless of color, the different components of Seba – FR Custom Kit may be combined, provided they are of the same size.