Integrated padding – the foams and lining of the boot are permanently attached to the shell. This makes the skates more responsive and lightweight. Such type of construction is usually reserved to top-end skate models and is dedicated to skaters who pursue precision.

Softboot is a boot type which is used most frequently in rec and fitness skates and to a lesser extent in freeskates and aggressive ones. Construction is based on composite base and cuff, to which boot made out of softer materials is attached (usually by glue and/or rivets). In high quality skates, soft part is made of resistant materials which allow for air and moisture exchange. Such boot template greatly improves the comfort of usage and reduces weight – thanks to these characteristics, softboots are widespread among recreational skates which are most often used for calm, leisure skating. Higher end softboots are equivalently reinforced and are good choice for prolonged training sessions. It is worth to highlight that, in fact, such skates provide relatively less control and reactiveness than full composite shells or carbon based skates. Because of this, softboots are not used in areas where these two points matter the most – in speed skating, freestyle slalom or hockey.

Composite shell is made of molecular composite (hence the name) of two or more plastic compounds. It can be reinforced with addition of glass fibres for additional rigidity. Characteristics of such boot depend on used materials, their thickness and density, however it can be stated that such skates, made by renowned manufacturers, offer excellent support and protection for user’s joints and feet, while being able to withstand a lot of abuse. It is worth to keep in mind that materials used to make the shell are usually thermoplastic, so if the rest of the boot (glue, leather, foams and so on) can withstand higher temperatures, boots are suitable for heat moulding.

Riveted cuff – cuff is attached to the shell by rivets.

Skates are equipped with classic laces.

45° Velcro Strap – strap allows you to tighten the boot and secure heel in place. Strap is lighter and less prone to damage than buckle, however, it does have a bit of elasticity to it and doesn’t give as stiff feeling as buckle.

Cuff buckle – traditional buckle with receiver. The cuff is shaped in a way that allows excess of a strap to be hidden in a hole, which makes skating safer. Buckle allows firm tightening of a top of the skate, which stabilizes your ankle.

Trinity frame mount – new invention introduced by Powerslide. Frame is attached to the boot in three points, which form a triangle. Two of them are located just below ball of the foot, providing a stable platform, which improves power transfer on push. Third point is located below heel. Frame and boot connection is much more rigid, works less and dampens vibrations much better than two point mounting. Trinity also removes technical limitations of 165mm and 195mm frame mounts, allowing to place wheels as close to the foot as possible, making skating easier, with lower centre of gravity. Every boot based on Trinity system is compatible with every Trinity frame.

X-Slot frame positioning system – it is a modification of both 165mm and 195mm mounting systems. Mounting points in boot can be moved longitudinally – metal plates with threaded holes are placed on rails, which allow precise adjustment of frame position. Moving the frame to the sides is possible thanks to oblong holes in the frame itself. Together, these two characteristics provide frame adjustment options without any blind spots. X-Slot also makes changing frames easier – there is no need to worry how the frame will fit under the boot. As long as they use the same mount spacing, X-Slot will allow you to pair them.

Die-cast frame – frame, or its parts, is made by injecting hot, liquid aluminium in to a mould. This process is less expensive than extrusion and cnc machining and frames still have better parameters than ones made from plastic composite.

Triskate frame – frame fits only three wheels of 90mm diameter or bigger. This makes skates lighter and faster than ones equipped with four wheeled frames of the same length, while maintaning desired agility.

Round wheel profile – wheels have round profile, which is midway between flat and bullet one. They are relatively stable and grip well, all the while maintaining good rolling and reasonable speed during skating. They are perfect for anyone who values versatility.

After exposition products are 100% efficient and are covered by the same terms (such as 14 days for refund or exchange of goods). The product can have minimal signs of use, possible discoloration and lack of original package, no extra tools or additional parts.