FR UFR Street Antony Pottier Intuition - Black - Boot Only Inline Skates

UFR Street are newest addition to freeskating family of skates made by French brand. At a first glance, they look like older, well known FR models, with a soulplate. And this is basically correct because functionally, it is what they are. However, things are not as obvious as they seem.

The UFR has been created as a solution to a lack of UFS (Universal Frame System) compatible and aggressive skates in the brand’s catalogue. Bear in mind that after Seba and FR Skates have parted ways, the skates based around CJ boot (the only aggressive skates in Seba line-up) stayed with the former. Thus, new brand was left without a model in this segment. However, while CJ skates were an attempt to attract audience looking for high-end, carbon based skates, UFR Street is a more affordable, plastic boot. Interestingly, the first run of these skates consists of three models and all of them are signature skates of Antony Pottier:

-UFR Street AP, the basic option. It is a boot only with regular FR liner.

-UFR Street AP FLAT, the complete skates coming with regular liner and Anthony’s FLAT frames.

-UFR Street AP Intuition, once again a boot only, however coming with Intuition liner instead of FR one.

It is safe to say that if you are familiar with regular FR models, you are also familiar with the new UFR. The shell is modelled after the same cast, have the same shape (apart from underside of the heel) and a cuff. Surprisingly, no UFR model comes with canting (cuff position adjustment) option known from FR1 and FR2 skates. Instead, all of them use a simple screw just like lower end FR3 and FRX. All UFR Street models have plastic top buckle and 45 degree Velcro strap. This is intentional, seeing that aggressive skates make closure elements more prone to damage – metal buckles and ratchet straps would break way sooner than simpler, plastic ones.

So, what’s the main difference compared to older models? Apart from the soulplate, the UFS compatibility, of course. But here’s the catch – while most raised heel aggressive skating boots use soulplate which is thicker under the heel, to make up for the rise, UFR uses a different solution. A thick block was added to the shell mould, which makes the boot having both mounting points on the same level even without the soulplate. This means several things:

-You can take off soulplates and attach frames directly to the boot. In fact, apart from UFR Street skates, FR has released three freeskating versions using this solution. Seeing that the boot itself is as streamlined and slim profile as regular FRs, this makes it a perfect candidate to put on big wheel rockered frames like Wizards!

-UFR soulplates won’t work with regular FR boots.

-UFR boots will not work with raised heel, 165 mm mount spacing frames.

Of course, there are some very interesting freeskating frames made for UFS, like long (280 mm) and low 4x80 Ground Control HD one or the already mentioned Wizards (although nowadays there are alternatives for boots with different mounting standards).

The bread and butter of UFS are aggressive skating frames, though, and this is what counts in case of UFR Street AP models. If you choose one of two boot only versions, you can configure your setup with frames, wheels and bearings of your choice.

As mentioned previously, the AP Intuition boot only version has been equipped with the famous Intuition liner. Without a shadow of doubt, this is the most praised and most likely, the best one on the market. If what you are after is uncompromised level of control, responsiveness and quality – Intuitions are for you. These are pretty special, as a pair can last years of intense use! The patented closed cell foams work wonders and made Intuition a leading company when it comes to liners made for skating, skiing and water sports shells. It is worth to note that version of the liner coming with UFR skates has been specifially altered in design to fit the FR shell as good as possible - it is not the same as regular Intuition V2 liner.