Iqon ACT WZ Team - Grey Inline Skates

Iqon ACT WZ Team – Skates for Wizard Skating with Interlink UFS, SSM, Trinity Mounting

Iqon ACT WZ Team is a skate designed from the ground up for Wizard Skating. By choosing this model, you get an incredibly responsive skate that offers full control over every movement. This is achieved through a stiff shell, combined with a fully laced thermoformable Myfit Prime liner, whose shape has been specifically adapted to this construction. This combination provides comfort and a precise fit, essential for executing complex maneuvers. The stable and durable base of the shell is paired with a Kizer Edge NT 5x80 frame, equipped with progressive rocker, unlocking the full potential of flow skating. But the options don't stop there— the patented Interlink mounting system allows for the installation of any frame in the SSM, Trinity, or UFS standard within the same boot. If you add a soulplate and aggressive frame (available separately), you can create a setup fully dedicated to aggressive skating. Regardless of the frame choice, the skate height will always remain as low as possible— all thanks to special adapters that provide maximum stability and the best possible balance.

Choosing this model also gives you numerous additional customization options, including increasing flexibility through CFC and SCF, adjusting the cuff position with the Revolve system, and fine-tuning the size with the additional Myfit Size Adjuster insole. The durable, wide ADL shell is designed to fit the shape and structure of most users’ feet— without creating pressure points. The combination of all ACT model features makes it one of the most customizable skates on the market, offering numerous personalization options. Despite its advanced features, beginners can also use these skates by selecting components that match their skill level.

Iqon ACT is available in a wide range of sizes, allowing for precise foot fit. The manufacturer offers 5 shell sizes in 38-39, 40-41, 42-43, 44-45, and 46-47. The internal length of the shell accommodates liners from 261 mm to 314 mm. Regardless of boot size, each skate comes with a 326 mm frame.

Key Features of Iqon ACT WZ Team Skates

• Thermoformable Myfit Prime Liner: The redesigned Prime liner has been developed to perfectly complement the ACT shell. The ability to thermoform at 90 degrees allows for a better and faster adaptation of the liner's internal shape to your foot. High-quality padding ensures comfort, and full lacing provides incredible control and a secure fit while skating.
• Kizer EDGE NT 580 Progressive Rocker Frame: The 5x80 mm frame features a progressive rocker setup, dynamically shifting contact points depending on pressure and foot position. This system allows balancing on different axes (1-2, 2-3, 3-4, 4-5), increasing maneuverability and enabling smooth transitions between movements. This solution provides greater agility and precision for technical tricks on smooth surfaces.
• IQON AG Access 80/85A Wheels and ABEC 9 Bearings: Durable wheels made from high-quality natural urethane. The wheels wear slowly and evenly, with hardness and grip tailored to the needs of Wizard Skating. The setup is completed with fast ABEC 9 bearings made from chrome steel.
• Interlink Frame Mounting System: Allows mounting frames in UFS, Trinity, and SSM 165 mm standards within a single skate, offering versatility and the ability to customize configurations for aggressive skating, urban skating, and Wizard Skating.
• Precise Revolve Cuff Position Adjustment: Adjusts the cuff angle and height. The Revolve system also offers interchangeability and broad compatibility with most cuffs available on the market, allowing for extensive personalization.
• Metal Mounting Plate: The integrated metal mounting plate in the lower part of the boot enhances stability and improves energy transfer while skating. This makes the connection between the frame and boot extremely durable.
• Rigid Lower Boot with Honeycomb Structure: Provides increased stiffness and a secure frame-to-boot connection while maintaining low weight, leading to better control and performance.
• Low Center of Gravity: Thanks to special adapters, regardless of the mounting system used, the skate offers the lowest possible center of gravity and skate height. This ensures optimal stability and balance regardless of the chosen frame setup.
• Wide ADL Shell: A specially designed, widened boot shape ensures a comfortable fit for most users, offering comfort in the toe, midfoot, and heel areas, regardless of foot shape.
• Kizer Supreme Buckles: The low-profile, sturdy buckle construction increases resistance to mechanical damage. This allows the skates to be used extremely intensively while minimizing the risk of damage.
• Flex Adjustment: The shell and cuff feature strategically placed cutting lines (CFC - Cuff Flex Customization and SFC - Shell Flex Customization), which, when trimmed, allow for tailored flexibility in key areas and an increased forward/backward range of motion.
• Durability: The stiff boot is made from a proven blend of composite reinforced with fiberglass, ensuring durability and low weight. Reinforcements in areas most exposed to abrasion and impacts increase longevity and protection during use.
• Vibration Absorption: The built-in shock absorber effectively dampens vibrations, improving comfort on uneven surfaces while also absorbing impact forces during jumps.
• Size Adjustment with Myfit Size Adjuster: An additional insole allows for minimizing gaps and more precise fitting of the boot’s front section.
• Complete Set: Along with the skates, you receive SSM adapters, Trinity adapters, Myfit Size Adjuster, and a maintenance key.

Iqon ACT – Good to Know

To quickly and easily switch to a frame with Trinity or SSM mounting, use the included adapters. The set also includes a Myfit Size Adjuster and an IQON assembly key. To correctly choose a liner for the boot, measure your liner's length from the bottom, then compare it to the shell length in the size chart. For the ACT skate shell, the best results are achieved using medium or thick liners.

Iqon ACT is the result of collaboration between Nick Lee Bruyn from the University of Antwerp, Powerslide, and global voices from the skating community. The goal was to create a skate tailored to the growing demand for Wizard Skating. The result is an incredibly versatile product, meeting the needs of a broad spectrum of skaters. If you're looking for a skate that allows you to configure an ideal setup to match your preferences, the IQON ACT is the perfect choice.