FR FR2 310 - Black Inline Skates

FR FR2 310 freeride inline skates

FR Skates focuses on solid freeride inline skates and high-end models for freestyle slalom. The FR2 series models have set technological standards for urban skating for over a decade and even today surpass most of the competition's models.

The FR2 310 skate is created with cutting the cost in smart way, which has resulted in a product that is very close to FR1 apart from very minor differences and as a nice bonus, have a frame that offers more options than one in its’ more expensive sibling.

Features of the FR FR2 310 inline skates 

• Rigid shell — made of durable material, with a range of conveniences that every user will appreciate. The shell itself is cut a bit more than usual for skates of this class, which increases comfort, especially for people with high arches.
• 16 possible cuff position settings — the most adjustable cuff position system among all skates currently on the market. As many as 16 possible settings allow for solving problems with bending legs at the ankles, and also allow for selecting the right cuff height for the user.
• Replaceable slider — or side protection of the shoe designed to minimize damage while sliding on wheels.
• FR Liner — a comfortable, anatomically shaped liner with the option of lacing at the top, which allows for better foot retention. Under the liner, there is a shock absorber that increases riding comfort and jump landings.
• Lacing system — laces, plastic buckle on the cuff and 45 degree ratchet buckle on shell.

Universal frame mounting system

Metal blocks embedded in the bottom of the boot at the frame mounting points. Above all, they allow for the adjustment of the frame position - each plate has 7 threaded holes for a screw. Furthermore, they stiffen the connection between the frame and the shoe, significantly contributing to the improvement of energy transfer to the wheels.

The spacing of the mounting points is 165 mm, and the shoes are compatible with most frame models in this standard - including three-wheel ones, which are easier to mount due to a special recess at the front plate, preventing the first wheel from rubbing against the shell.

R2 frames of 246 mm length

R2 frames, 246 mm in length, complete with FR Downtown 110 mm wheels and Twincam MW7 Freeride bearings. The added stability of longer frame makes FR2 310 a great “cruiser” skate, allowing for stronger push and higher speeds than more freestyle-oriented 3x110 mm versions of FR1, FR3 and FRX. At the same time – 246 mm is still short enough to not give you any problems whatsoever with turning.

FR FR2 310 inline skates - Worth knowing!

Thanks to the fact that the 7 holes on each plate for mounting the frame give us more possibilities of spacing than 165 mm, the Endless brand has created a special, low-profile version of the Endless 110 frame dedicated to FR1/2/3 skates, using a 180 mm spacing! There is also absolutely no problem in fitting frames from other manufacturers to the boot.

FR2 310 are standing out among the other triskating FR models and have the unique flavour to them. If you are not a fan of super short frames but like to have 3x110 setup and don’t want to go for 3x125mm FR1 model – they are for you. A highly recommended skate for fast urban cruising and no stranger to jumps and slides too – FR2 310 is a winner for both beginners and advanced skaters alike.