Powerslide - Next - Black - Boot Only
- pair of skate (2 boots/skates)
- frame mounting screws
If the ordered goods do not meet your expectations, you have the right to return or exchange them within 14 days of receiving the order.
A product with a physical or legal defect (warranty) can be used to make a complaint within 2 years from the date of purchase.
- category: freeskate, urban
- model: Next 100
- boot: Next, Trinity, Glass-fiber reinforced plastic
- liner: My Fit Fat Boy Recall Dual Fit
The Powerslide NEXT set new standards in the field of freeskating and urban skating.
For the first time in a history, a hardboot has been equipped with innovative Trinity frame mounting. This three point mounting has allowed engineers to lower the center of gravity in a way which was simply not possible before and make whole skate more rigid. Thanks to these qualities, NEXT give you a superior control and energy transfer, on levels which up to this point were limited to more expensive, one-piece boot freeskates.
Powerslide took great care in making the NEXT boot as customizable as possible, allowing you to adjust it to your anatomy and preferences. High laced boot with two buckles holds your feet firmly. Cuff is equipped with canting system allowing for four different positions, which can be used to counter pronation or supination in your ankles, or simply give more or less movement freedom depending on the height. Moreover, both cuff and the shell can be cut along factory made marking lines, to give more flexibility. Front part of the shell is protected by a replaceable plastic strip which covers not only the sides like traditional sliders, but also the tip. Inside the shell you will find a new version of well-known MyFit FatBoy Dual Fit liner, this time made with special Recall padding which adjusts to your anatomy in body temperature. Naturally, the liner can be heat-moulded for better effect, just like previous versions. It is also laced in the upper part, a feature which allows securing tongue in place.
NEXT BOOT ONLY version comes without a frame, wheels and bearings – this gives you freedom of choice in creating your own skates. Simply add any Trinity system frame in to your basket along with wheels and bearings of your choice.*
Frame length or wheel size do not matter – any Trinity compatible frame will fit, even if it is speedskating or freestyle slalom one. Moreover, you will always benefit from lowest possible center of gravity and superior energy transfer.
NEXT is a true revolution in category of hardboots made for urban skating – build your own setup and enjoy skating with the most advanced hardboot freeskate, tailored to your needs!
*Warning: In case of ordering parts along with the boots, skates need to be assembled using parts and tools added in the box.
Powerslide is one of industry’s leaders even though it is relatively young company – it has been founded in year 1994. The Germany based brand has entered the market at height of inline skating’s popularity, at the time when market was flooded with low quality skates which could be described as toys rather than sport equipment. From the very beginning, Powerslide had one goal: to break the perception of inline skating being a leisure activity for kids and to promote it as a sport for everyone. That’s not a surprise considering that company’s owner, Matthias Knoll, is a skater himself. As speedskating contender, he breathes this sport and his love for it has been fuelling Powerslide for over 25 years.
If we were to describe Powerslide in three words, these would be: quality, variety and innovation. From the very beginning of company’s existence, Germans have challenged industry’s giants and competed with them in field of quality. Nowadays they are in lead of the pack when it comes to technology: heatmoldable liners and boots, compressed carbon shells, revolutionary Trinity mounting – these things are relatively fresh and competition is yet to respond. Looking back, Powerslide was the first company to introduce carbon freestyle skate with integrated padding. They were the first company to introduce carbon based aggressive skate. 125mm wheels were introduced to speedskating thanks to them. The introduction of Kizer Advance frame and then Level 2 made a big impact and lead to rapid evolution of aggressive flat frames. Germans were the first company to make triskates a significant part of their offering, starting a new trend. Nowadays, Powerslide are the only company that makes real off-road skates (not to be confused with off-road rollerskis).
This pursuit of change and improvement is unique – no other company in this industry is having a boss willing to take even the craziest of ideas and concepts to production stage. Powerslide also have, without a shadow of doubt, the richest catalogue of products among all skating companies; covering even the most niche equipment made for freestyle slalom, downhill and inline alpine. They have full range of accessories and parts: helmets, protection pads, wheels, bearings, frames and so on. The company is also making rollerskates, providing recreational, roller derby and skatepark models and equipment. It can be safely said that if Powerslide is not making something skating related, chances of other companies having it in their offer are slim to none.
Powerslide have an impressive brand portfolio: MyFit liners, Wicked bearings, Reign hockey skates, USD aggressive skates, Kizer frames, Undercover wheels, Matter wheels, Gawds boots, wheels and softgoods, Prime wheels, Juice rollerskates wheels, Chaya rollerskates, Ennui protection and many others.
What makes Powerslide special are company’s people and supporters who create a community around it. Germans support and cooperate with skaters all around the globe. International Powerslide Team is composed of names every inline skating fan should be familiar with and believe us - there are far too many to list them here.
Size tableWhat is Mondopoint?
Powerslide - Next - Black - Boot Only
This product has no reviews yet.
Add first !